Are you looking for ways to make your dirt bike faster and increase control while riding? One of the best ways to achieve this is by modifying your dirt bike to turn faster. Making your dirt bike turn faster will allow you to navigate through corners with ease, giving you a better riding experience. In this blog post, we will be discussing the 7 best mods to make your dirt bike turn faster.
1) Remove the Steering Stoppers:
Steering stoppers limit the rotation of your bike’s steering. Removing these will give you a little more advantage because it lets your dirt bike steer further in the corners. Removing the stoppers will also lengthen your steering, making your bike more responsive in tight corners. However, you need to be cautious as it is possible that the front tire may collide with the bike when turned too far.
2) Set the Steering Stem Nut Tightness:
The steering stem nut helps keep the steering stem in place. However, if it’s too tight, the dirt bike won’t turn as smoothly as it should be. A loose steering stem, on the other hand, can negatively affect your bike’s handling. The steering stem nut should be tightened to the proper torque specification. This maintains the tightness of the nut and ensures the steering stem turns smoothly.
3) Cut the Handlebars to Make the Dirt Bike Turn Faster Around Trees:
Cutting the handlebars can help improve how fast your dirt bike turns around trees. Narrowing the bar allows the rider to turn the bike quicker, especially around narrow trees or rocks. When cutting the handlebars, make sure to mark the distance to prevent making a mistake.
4) Install Handguards:
Handguards help in tight turns by ensuring the rider’s hands are protected. It’s common for riders to brush against tree branches in tight spots. With handguards, your hands won’t get hit. Additionally, they provide good leverage–you can push on the handguards to assist with grip and steer the bike.
5) Cut the Chain One Link Shorter:
One link on your chain can make all the difference. By cutting one link off of your chain, the final drive ratio is slightly shortened. This increases the acceleration and top speed. It also enables the bike to turn quicker. Make sure you get the right chain cutter for this job or have a professional do it for you.
6) Lift the Front Forks on the Triple Trees:
Lifting the front fork on the triple trees can change the geometry of the front end of your dirt bike. Doing this can make it easier for your bike to turn. However, you can’t raise them too much as you also need to maintain rideability. A good rule of thumb is to lift them about a quarter-inch.
7) Set the Correct Sag:
Setting the correct sag will ensure you get maximum efficiency when racing or riding in technical terrain. The bike’s rear suspension sag dictates how much of the weight is distributed to the rear tire while riding. The correct sag will allow the bike to pivot between corners with precision.
In Conclusion:
Making your dirt bike turn faster will not only improve your riding experience but may also give you an edge when racing. When considering the best mods for your dirt bike, it’s essential to know which ones will give you the best outcomes. By following the above-listed mods, you can make improvements without breaking the bank. Always keep in mind that before modifying your dirt bike, make sure you analyze the risks involved and balance them with the desired gains. Get out there, try these mods for yourself and enjoy the ride!
