As a dirt biker, it’s essential to ensure your safety while riding. Installing handguards is an easy and inexpensive option to enhance your safety and protection. In this blog post, we’ll take you through the step-by-step process of installing dirt bike handguards. We’ll also discuss the necessary tools and tips to make the installation process seamless. So, are you ready to install your handguards? Follow along!
Check out all different types of dirt bike handguards.
Process
Step 1: Gather the Necessary Tools
Before you begin the installation process, ensure you have all the necessary tools. You’ll need the following tools: drill bits, wrench, screwdriver, pliers, and handguard kit. If the kit doesn’t include mounting brackets, then purchase them separately. The mounting brackets will secure the handguards to your handlebars. Once you have all the necessary tools, proceed to step 2.
Step 2: Remove the existing Handguards (if any)
If you already have handguards in place, remove them. Use a wrench to unscrew the bolts that secure the handguards to the handlebars. If the are any clamps securing the handguards, use a plier to loosen them. Once the handguards are removed, proceed to step 3.
Step 3: Install the Mounting Brackets
Place the mounting brackets provided in the kit on the handlebars. Ensure they are evenly spaced apart to enable the handguards to fit perfectly. Let someone hold the bracket in place while you use drill bits to make a hole. Ensure the hole is deep enough to accommodate the bolts and nuts that come with the kit. Repeat the same process on the other side of the handlebars.
Step 4: Install the Handguards
Place the handguards in the respective mounting brackets. Use a screwdriver to bolt them in place. Make sure they’re tightly fastened to avoid any wobbling or loose fitting. Do the same for the other handguard.
Step 5: Test the Handguards
After the installation process, test the handguards to ensure they’re securely fastened. Swing the handlebars back and forth, and if there’s any movement, tighten the bolts using a wrench. Also, take a short test ride to assess the stability and comfortability of the handguards.
Installing handguards is an easy process that doesn’t require any professional help. The process may seem tedious, but we’ve provided a step-by-step guide to make it seamless. As a dirt biker, safety should be your top priority. Handguards provide additional protection, especially when falling off the bike. It’s essential to ensure they’re tightly fastened to avoid any wobbling or loose fitting. We hope this guide has been helpful. Stay safe, and happy riding!
The Process to Install Full Wrap Handguards
For any motorcycle enthusiast, protecting your hands while riding is a top priority. Installing full wrap handguards can offer you the protection you need while maintaining your bike’s aesthetics. However, the process of installing these handguards can be intimidating, especially for someone without prior experience. But fear not! This ultimate guide will walk you through the process step-by-step to ensure you get it right.
Step 1: Gather the necessary equipment
First things first, you need to gather all the required tools and equipment needed for the installation. You will need a drill along with drill bits, Allen wrenches, a torque wrench, a ruler or measuring tape, and of course, your handguard kit. It’s important to ensure that your handguard kit is fully compatible with your motorcycle model.
Step 2: Remove the handles and switches
Before installing the handguards, you need to remove the handles and switches from the handlebar. Start by loosening the screws that hold the controls in place, then move them slightly out of the way. Be extra careful when handling the wiring to avoid damaging it.
Step 3: Installing the handguards
After removing the handles and switches, you can proceed to install the handguards. Start by drilling a hole at the end of your handlebars using the drill bit. Next, place a small amount of grease on the expanding nut provided in your kit and insert it into the drilled hole. Mount the handguards onto the nut using the bolts included in the kit. Be sure to tighten them using your torque wrench to avoid any loose fittings.
Step 4: Adjusting the angles
Once the handguards are in place, you need to adjust them to the desired angle. Adjust them until they are comfortable for you, then tighten the bolts further.
Step 5: Replace the controls
After the handguards are on and properly adjusted, reattach your bike’s controls by tightening the screws you have loosened earlier.
Conclusion:
Installing full wrap handguards on your motorcycle can be a daunting task, especially if you’re doing it for the first time. But with this comprehensive guide, you are well on your way to creating a safer yet stylish ride for yourself. Remember to always be careful when handling equipment, especially with wiring. Once you’ve completed the steps, give your motorcycle a final test run to make sure everything is secure and comfortable. Ride safe with confidence knowing that your hands are protected by the best full wrap handguards.
Benefits of using the Wrap-Around Handguard
Being a biker is an exciting and thrilling experience, but it also comes with certain responsibilities to ensure your safety and protection. One such important accessory that every biker should consider is the wrap-around handguard. It is an essential tool for a safe and comfortable ride in any terrain. In this blog, we will discuss the benefits of using a wrap-around handguard and explain why it is a must-have for every biker.
1. Protection against debris and weather conditions
A wrap-around handguard is designed to protect your hands, fingers, and wrists from the harsh weather and debris that can come your way while riding. It serves as a barrier between your gloves and the wind, rain, and cold. Using it, you can easily maintain a firm grip on your handlebars without losing control no matter what the weather is. Also, it protects your hands from small stones and twigs, which can be dangerous while riding at high speeds.
2. Better comfort and relaxed ride
When you’re on a long ride, the repetitive motion of holding onto your handlebars can lead to serious hand fatigue and discomfort. But with wrap-around handguards, the pressure is distributed evenly across your hand, wrists, and forearms, making it a more comfortable and relaxed ride. It reduces the vibrations created by the handlebar, thus minimizing the chances of numbness and tingling. Using a handguard, you can ride long distances without worrying about any joint pains.
3. Defense against accidental impact
If you’re a rider, you know that accidents are a part of the experience. Using a handguard can significantly reduce the risk and severity of hand injuries. In a collision, the handguard can prevent your hands from being crushed or trapped between the bike and the ground. It is particularly useful when you’re riding off-road or in rocky terrain where you are at a greater risk of hitting obstacles.
4. Enhances the look of your bike
Wrap-around handguards come in various designs and colors to suit your bike’s style. You can choose the one that suits your style, and it can significantly enhance the look and aesthetics of your motorcycle. It is undoubtedly one of the simplest yet effective ways to give your bike a unique appearance, making it stand out from others.
5. Cost-effective and easy to install
One of the best things about wrap-around handguards is that they are cost-effective and easy to install. Whether you’re an experienced biker or a newbie, installing a handguard is a simple process that can be done in minutes. Plus, they don’t require any special tools or expertise, making it an affordable way to protect and enhance your biking experience.
Conclusion:
In conclusion, using a wrap-around handguard is a must-have safety accessory for every biker. It is designed to provide protection, comfort, and style while riding in different terrains. Whether you’re a professional or a casual biker, the benefits of using a handguard are invaluable. So, make sure to invest in a high-quality handguard, and take your riding experience to the next level!